repair

Hello all, My Jeep Wrangler TJ called Stella has failed its MOT and the MOT garages I am taking her too are rather saying they aren’t confident they can do the repair and/ or they can’t get the parts. Anyone on here have any ideas or connections to get her repaired? Picture attached of the...

Hey all, I recently picked up a Uniden pc78xl cb radio from a garage sale and it's not receiving, from what I can tell. It is confirmed to transmit. After opening it up, nothing immediately stands out to me or to my navy electrician friend (he straightened a capacitor, that's it). What should...

Borrowed my buddies truck and got the jeep back to my house. Will drive on/off the trailer, seems to be running fine. Can’t pinpoint where the fluid came from under the jeep, other than I know it’s the transmission somewhere. It looks like where it mates to the transfer case? It’s hard to see...

I’m overwhelmed and out of my depth. My brother bought me this Jeep to help me get RHD for my new job as a rural mail carrier sub. My route covers 110 miles of highway, in town, and rough rural roads. I am currently underemployed (broke) but I can get more work subbing for other routes (or get...

I have a 2000 Jeep TJ 2.5 L 5-speed manual. Recently, a support piece to the exhaust right in front of the muffler broke off and melted through a wiring harness. I have provided pictures to help explain. I am positive that me messing (IE me being an idiot and forcing it off) with the wire ruined...

My front locker stopped working and I can't afford to buy a new Hyundai or whatever brand one. I decided to get the multimeter out and start testing - was getting power to the wiring harness so I knew the car wiring was "good" and everything on the circuit board had continuity. I tried to strip...

Hi guys I've got a 1999 Sahara with a 4.0 and 32rh trans. For the last month I've been dealing with a combo of rpm surging, power loss and high idle. I cleaned the throttle body and sensors, changed the spark plugs and wires and a new distributor cap. Which fixed the problem for a day and a...

Hey guys and gals, I just bought a 2004 TJ sport last friday and my turn signals are real weird. When I turn them on, they work normally for like a second before blinking very rapidly then shutting off completely. The rapid blinking last for less than a second. keep in mind one of the side...

Hey guys, so I wanted to upgrade my suspension (was thinking of the H&R + Rancho combo) but as I took a closer look I've now realized that that my rear upper coil spring mounts on both sides are pretty rusted. When I boutht the jeep a few years ago, the first thing I looked for was rust (thanks...

I'm needing advice on how to proceed with drilling and adding rivnuts/nutserts to get footman loops back on a pair of doors. Whoever previously owned them stripped or broke the original bolts for both doors' door strap loops. On the passenger door they drilled out new holes. The ones on the...

I have an unused 1997-2002 center repair section from Pocono Metal. Label and online order info doesn't specify left or right. Guessing from the photos, it is the right center frame piece. They sent me (or I mis-ordered) the wrong part. $130 new. Make an offer. Can help with delivery any...

Hello, I ordered 7" LED Headlights off of Amazon with a H3 connector and swapped them out for the stock headlights. Now when I drive the Jeep, there is a clicking sound behind the glovebox and every time the click happens the headlights turn on and off really quickly (and the high beam light...

I have been having issues with the dash gauges going in and out, I’ve done some research and I think it has to do with this in my IOD fuse slot. Is it safe to pull this and put a 10A fuse in its place? I’m afraid if I pull it, the fuse slot won’t accept the new fuse. I have attached a photo.

A few months ago I started intermittently getting the CEL code p-0133. So I got a replacement sensor from NTK and tried replacing it. I had zero luck since it was seized so I sent my jeep and the NTK sensor over to my mechanic who was able to put it in for me. Cleared my check engine light for...

Hi there, I’m reaching out because I’m really desperate for some help right now. First of all, I know very little about vehicles, but this will be my third Jeep TJ, it is a 2000 Wrangler SE, four-cylinder. It has about 150,000 miles on it. I bought it about 5 years ago and have had to do very...

My Dana 35 finally blew up and now I need to road trip home to fix it from Florida to Ohio. Is leaving the rear shaft out and driving back in 4hi going to cause excessive wear to my T-case or should it be fine? It’s got the wide chain kit and an sye I also don’t care if the Dana 30 goes just...

The zipper on my back window has stopped working, and now all the pulls and stays are gone. To be clear, the seam binding the zippers to the window and the seam binding the zipper on the soft top side are both fine; the teeth appear to be ok. I've tried replacing the pulls with new ones from...

Hello! This is my first time posting on this thread but have lurked for many years. If this is the incorrect place to ask this question then please let me know! As said above, I've scoured the site for over a decade getting information on fixing my Jeep. There is one problem that I have not...

Hi everyone, Just joined the TJ family a few weeks ago and love it! I am doing some small repairs (bulbs, switches, etc) but can’t find what I need to order to fix the indicator on the automatic shifter. The letters are there, PRNDL, etc, but when I move the gear shifter nothing changes to...

Hello all, Absolutely hate that I have to make this post asking for suggestions on my Jeep. Bought it about 2 years ago, Jeep LJ 160k 4.0 automatic. Runs great and drives pretty well. There’s a shitty lift kit that I’m planning on upgrading at some point as well as plenty of other stuff...