question

I'm currently in the process of attempting to DIY a power steering cooler out of a general oil cooler that was supposed to be for another project. Im noticing that the earlier gen TJs may have return lines that connect to the rack and pinion with a simple hose clamp while the 2006 TJ I have uses...

Hey everyone, I know there are several threads about the UCF Ultra High Clearance Skid Plate, but I have a couple questions specific to my setup. I’ve got a 1998 TJ with a manual transmission, 1.25” body lift, 1” motor mount lift, and a slip yoke eliminator. I’m ready to replace the stock...

Took off my drivers side chair and found this not connected to anything. Looking for anyone who knows what this is for and how to fix it. It might have to do that my emergency break light stopped working recently but don’t know.

Hey everyone! This might be a dumb question, but could I swap a Dana 44 from a 95 Isuzu rodeo into my 2006 jeep tj? Thanks.

Driving my 2006 4.0L Inline 6 Yesterday, I started hearing a knock while accelerating, know I hear it while idling. About 160k miles on it and a brand new timing chain and assorted parts that come with it. I brought it to my mechanic and he said it was likely coming from the valves, but he would...

I am currently installing an AMP for my 2006 Jeep TJ. I cannot get the amp to turn on. I found that I am getting 0 volts from my blue/white amp turn on wire. Does anyone have any ideas why it’s not showing power? Any idea how to fix?

Working on my 2006 Jeep TJ. Currently installing new speakers and a 5channel amp. Clearing out the sub box and found wiring that is connected to the factory amp. Does anybody know what this is and what it connects to? Can I remove this? Thanks.

I bought my TJ 6 months ago and I am planning on putting in aftermarket sound system. I found this in the location where I was gonna put my amp. Does anyone have any idea what this box could be? My dad thinks it’s for the antenna. Also, could anyone tell me what the other wiring is there for? Thanks

Hey guys. So ill try to make a long story short. My dad bought this jeep about a year ago maybe more. Since hes owned it ive been working on it and i made a post here on his behalf. It was all over the road. Had heim joint steering linkage. Sloppy control arms. Junk steering box. Since...

Does anyone know how to tighten/remove the radiator supports on the Savvy 1.25 BL? I know that you have to take the headlight out to access the top bolt, but how do you grip it? I've tried pliers, wrenches, a vice grip, using a pry bar to try to hold it in place, all in vain. Or should I just...

Okay so to start this off, I've been trying to get my 99 TJ ready for a 500 mile trip both ways, and as is such I've changed all fluids and done most of the maintenance that was required, but I'm having a hard time with the timing chain. It has a 4.0 in it, and from moving the crank back and...

Hello everyone, my family and I recently purchased a 1998 Jeep Wrangler SE, 5spd manual transmission with the 2.5L engine. Being the numb nut that I am, I was messing around with the glove box and looking to see what the wiring and fuse box looked like underneath. I saw a switch and of course...

I have a mostly stock 99 TJ Sahara (29 inch tires vs 28 stock and a Winch and steel bumpers... those are my only non stock items) with a Dana 30 in the Front and a Dana 35 in the rear. I am trying to decide if I should swap those out for Dana 44 or a Ford 8.8 or if I should just beef up my...

Alright guys. Getting ready to start a new project. A rhd 5.9 swap. I have a few things I can’t wrap my head around as of yet.. Backstory. I have a full running working (daily driver) donor vehicle 1999 Durango slt. With a 5.9 Planning on putting the entire drivetrain minus tcase into my...

Hi there everyone, first post so be gentle. I just bought a red '02 TJ after a few years of poking around looking for the right one and trying to figure out whether I wanted an XJ or a TJ more. Needless to say I'm smitten and already looking to start building. The previous owner (number 3 and...

Hey there, I'm new here and this is my first thread post. I turned 19 recently and my parents got me a 97 TJ for my first vehicle. Its a standard Sahara, green with a tan hard top. I love it dearly, but lately its been having some minor issues that I have been able to fix for myself. Now though...

Replacing coolant system and I just noticed the MOPAR water pump I ordered has some small imperfections on the mating surface (pics below) - I understand the mating surface has to be clean and flat for a perfect seal so will these little imperfections be a deal breaker or is no big deal? they...

Hi, I am new to this and looking into buying a used hardtop in the near future. What is the best way to go about it? Where are the best places to look for one without completely breaking the bank? Thank you in advance for your response.

Hello! I am looking to buy a jeep tj project and i’ve heard that 97’s are the model that you should NOT buy because the parts are more specific and harder to find. The only problem is that all i find in my price range is 97’s. So i’m asking what you think i should do? Should i rule out 97’s...

Im measuring my suspension lift height to determine if i can remove my tc drop by adding a 1"mml and remove the current 2" body lift replacing it with a 1" body lift. After measuring the front and rear coil springs the lengths came out to 15" in the front and 11.25" in the rear. Does that sound...