grinding gears

Sounds (and feels) like something decided to dislodge itself in my AX15, just in time for spring. Thoughts are welcome, but I’m pretty sure I just need to pull it and crack it open. I will also need to repair the mid section of the frame once the pan is down, because… well I’m sure you know.

Hey y’all...did a quick search and didn’t see anything on this topic...I have an 06 LJ with the 6 speed. I’m having issues shifting into the even gears because the shifter is running into the tub cutout. It’s only recently become a problem. It seems like the driveline is out of alignment, but I...

Hey all, I have recently just finished a 5.2 magnum swap on my 01 tj. Rebuilt 5.2 magnum mated with an NV3500 Manual trans. NP231 T-case from a Cherokee. I did not touch the trans before installing it because I have never rebuilt a trans before. I did however rebuild the motor and that went...

Hello, I bought a 1998 2.5 in September and I'm having a problem where if I'm rolling in 4hi for a while it will pop out and I get a loud grinding coming from the front of the Jeep and I can't move until I put it back in 2 wheel. It happened once when I hit a big pot hole and once while driving...

Hey again Tj forum, Yet another noise coming from my 2000 Jeep TJ 2.5l manual 5-speed with 150k miles. As I pull out the clutch while in first gear, I get a grinding sound. Once I have my foot completely off the clutch, it stops. Then, a lot of times when I get to around 2,700-3,000 RPMs, I...

So I'm New to this whole forum thing but I was told that I could get help with issues that I have with my jeep, so here it goes... So I have a 2006 stock LJ Rubicon, and I was driving up my driveway and i shifted into 4HI and shortly after, I put it in neutral and attempted to shift into 4LO...

I'm looking at a 65th Anniversary with 80xxxkm on it. 3rd gear is crunching for some reason. Best to avoid or is this a common problem? Any advice on this?