elocker

I’ve brought 4.56 gears with a thick cut rear for my Dana 44 in my TJ, the dif shop I’m getting them installed at has told me that I need a new carrier to install the numerically higher gear but I was under the impression thick cut gears could be installed in the standard lsd carrier, is this...

New to the forum, need some identification help and what next help. My 06 LJ failed inspection on some spots so was in the middle of fixing all that and came to a halt so I figured I would look at my front locker that doesnt work. At first inspection the wire is totally off.. Maybe the last...

Eaton elocker 19818-010 for Dana 30, 27 spline. Roughly 20000 miles on it, has seen a few offroading trips down south. Good and fully functional. $700 New Spicer 4.56 ring and pinion kit (708132-5) for Dana 30 $200 Limited time offer, if you are interested - don't dwell on it, let me know.

Over the winter of '22-'23, I had an issue that forced me to go ahead with a Super35 install, so I thought I'd post a cost breakdown for anyone looking into a Super35 setup. After looking for a Dana 44 for about a year and doing the math, I decided a Super35 setup was the most cost effective route...

I just finished the physical portion of installing my Eaton E-locker, now I have to do the wiring, my least favorite of automotive work. For those of you who have installed e-lockers, will you share with me how you ran everything and any tips and tricks you ran across. I'm trying to make this...

I am having a run of bad luck with my front locker install. Im building my Dana 30. I trussed and sleeved it and welded gussets on the c’s. I purchased a 30 spline Eaton elocker 4 for my Dana 30 from Quadratec. The first one they sent was a 27 spline locker. They corrected the issue by sending a 30...

For anyone running a dana 60, I've got a new open box Eaton Elocker. Got a loaded 60 axle for mine that already had a locker. Eaton Part number 14023-010 $925 shipped in the CONUS

I'm looking for a locker for my open diff TJ so I was looking at the eaton website for their elocker and noticed that there seems to be a new design that works more like an ARB or OX. I don't like the design that uses the rotation of the carrier, I wheel a lot in the snow and with a manual so I...