clutch problems

Hello to all. I could use any advice. This is my first Jeep (03 Sport) and I have done some work on it so far. I am struggling to diagnose this issue. Symptoms: Clutch will not fully disengage Starting will lunge forward (or backward if in reverse). I can drive it once it's in gear with no...

Hello everyone, I have been having quite the saga with my clutch master/slave cylinder and need some advice. I replaced my clutch a few weeks ago (with a Luk 05-065 kit) and replaced the clutch fork and master/slave assembly at the same time. I replaced everything as the symptoms I had were...

First or second time on the forum bare with me. So I have a 2001 jeep Wrangler TJ 4.0 with the NV3550. I my stupid self decided it would be a good idea to tackle a new clutch myself. So I dropped the transmission and did so with an LUK kit + new flywheel. BRUTE force TO bearing (all metal)...

One day while driving, the bite point on the clutch pedal suddenly moved much higher. Where it used to engage was pretty close to the floor but now it's right at the top. It still feels like it's engaging fully. But I'm worried it won't be if it happens again. Its been nearly a month with no...

2002 Jeep Wrangler tj sport. Yesterday I was driving and all of a sudden it didn't seem like the clutch was helping me get into gear. Just had to shift at speed. I did some research and it seemed like it was master and/or slave cylinder. I replaced those and it didn't help. I Can shift with the...

I recently purchased a manual 2006 TJ with 110k miles. Shortly after buying it, I started having a problem with my Throwout bearing and decided to replace the whole clutch. After numerous visits to this shop that specializes in jeeps (which is also the place I bought it from), I noticed yet...

97 4.0 with ax15 Recently I’ve been having some trouble with my Jeep In may I replaced the clutch due to already having the trans on an unrelated issue I put a duralast (autozone brand) because that’s what I could get at the time I’m starting to think that was a big mistake At the time knowing...