clutch pedal

  1. Jerry9254

    Clutch push rod retaining clip (master cylinder-end, not pedal-end)

    I have a 2004 Wrangler TJ. The clutch pedal push rod has fallen out of the clutch master cylinder at the firewall. The pedal-end of the clutch pedal push rod is still attached to the pedal. When I manually reinsert the clutch pedal push rod into the clutch master cylinder the clutch still...
  2. D

    Clutch chatter

    First or second time on the forum bare with me. So I have a 2001 jeep Wrangler TJ 4.0 with the NV3550. I my stupid self decided it would be a good idea to tackle a new clutch myself. So I dropped the transmission and did so with an LUK kit + new flywheel. BRUTE force TO bearing (all metal)...
  3. M

    The REAL Clutch actuator pedal bushing

    Trying to figure out which part and part number is the real one to use when replacing a broken stock clutch linkage bushing for a 2000 Jeep Wrangler. M stock part broke. It look more like # 1 and # 3 below. But there's conflicting information on line about # 2 being the right one to use even...
  4. Chris97

    Clutch doesn't fully disengage with pedal all the way in - Solved

    Hi all, I am new to the forms but have had my jeep for about 7 years now. I bought the jeep at 96k miles and noticed that the clutch was disengaging very late in the pedal throw (bottom 25%). At 120k miles I replaced the clutch with a Luk 05-065 clutch kit and saw little improvement. Now at 145k...
  5. K

    Advice on clutch issues

    I have a 2004 TJ Sport with I6 4.0L and Manual 5-speed transmission with 169k miles that has been experiencing clutch/transmission issues for the past week. I noticed the issues start when coming off the highway in 5th like I've done plenty of times, after I noticed vibration in the clutch...
  6. GrizTheJeep

    Clutch pedal hard as a rock!

    Hey everybody! I'm new to the forum and need help! Today on my way to work, I went to shift to 4th gear and my clutch pedal wouldn't budge. I had a master cylinder/slave cylinder assembly dropped off and I promptly I stalled it. First pedal push, the plastic retainer strap that holds the...
  7. Quad City Jeep

    adjusting clutch pedal tension

    So I've been driving my 97 Jeep TJ for 4 years now and I've developed a problem from pushing on the clutch. I get a pain in the ball of my foot right where the small clutch pedal makes contact. The pedal pushes with a lot of tension (doesn't seem excessive - probably normal) and I wonder if...