1999

Hey all, I just bought a ‘99 TJ Sahara with 111,000 miles. It’s got the 4.0, 5 Speed, and 4WD. Already has a 3 inch lift. Looking forward to making it into my reliable daily and weekend toy to keep the miles off of my ‘02 Tundra with only 95k on the clock. The TJ definitely needs some work...

Great condition original uppers. VIN confirmed to be 1999 Dark Tan. Seems like it'd be a shame to cut these skins off so I bought different frames. $150 + ship from 55044, or local pickup.

Hi everyone from Rome, Italy! Just got another TJ few weeks ago, to keep company to my lovely 2.5L. So this 2000 stock and beautiful 4.0L (built in Dec '98) has an issue with the airbag light on the cluster that comes on and off randomly when driving or sometimes when turning. I'm thinking about...

Hello Jeeper, I want to remove my driver seat without removing all of the seat frame (I can't with my rotten floor). Under the seat, there are 8 bolts. 7 are easy to get the nut off, but the last one is lock IN the frame of the seat. How can I remove that last bolt? Thanks!!!

Help! My 1999 TJ had a headlight randomly go out and when I went to change it I realized the wiring was corroded. I have someone who can fix it but I am not sure what part I need to buy as I am not the most knowledged when it comes to wiring parts. I tried researching it but most videos/forums...

recently finished a swap on my jeep with a 5.9 and 46re out of a dodge. Drove about 5o miles and it threw a p0713 code, I wasn't worried relooked at my wiring and can't figure out what I did wrong. everything is wired to the pinouts. the sensor has voltage, If I test the signal on the sensor it...

Starting in about 2018 I was desperately looking for a project. My friends and I had been on a University Baja SAE team, and after finishing college one of my buddies decided to make his own, more powerful Baja car. While that project was going on I figured it would be nice to have a reliable...

Looking to buy an older Jeep Wrangler TJ, I'm looking more specifically for anywhere from a 1996-1999, what would be a good price? Also what would be too high for miles?

Hello Everybody, I have a 99 4cyl with the ax-5 transmission. Recently I replaced my shifter bushing because I had a lot of play and slop in my shifter. it didn't fix anything. I drove my friends' jeep the other day and his felt very tight and notchy. I was wondering how I can get that on my...

Me and my family recently bought a 1999 2 door jeep wangler Sahara, I want to put a sub in it because the previous owner got it wired for a sub. Ive looked across the internet and i cant seem to find anything. Any suggestions?

Hello all, I have recently bought a 1999 TJ, full stock. I have plans to get a 4in. suspension lift and 33s or 35s. My only thought is the axles, I have factory Dana 30 Front and Dana 35 Rear. My main use for it will be for road trips and daily driving, but I do want to do some light offroading...

Hi All, So I'm in the market for a new front driveshaft for my 1999 Jeep 2.5l 4cyl. On all the websites I can only find front driveshafts for a 4.0 I know that the auto ds and the manual ds are different but are the 4.0 and 2.5 ds different. If anyone knows if the driveshafts are interchangeable...

I was thinking about replacing my factory mirrors (bc they are both cracked). I found some good quick release mirrors and I was wondering if anyone has ever just permanently replaced the factory mirrors with quick release mirrors. I don't see why it would be a bad idea besides the holes where...

I purchased a pair of these for our 99' TJ. I have no issues unbolting and unplugging the taillights however as many of you know putting those cages on increases the depth of the taillight and the 3 triangular screws will not re-thread as they are too short. 1. Anyone else have this issues...

So to start off I got my jeep in January after saving up for about three months working at my local gym. My dad has basically only owned wranglers all his life so we knew exactly what we were looking for. This is what it looked like when we first got it and this is what I plan on having it look...

So, is this the place for a build design thread or does that belong in the TJ section? I'm starting to get a handle on what the SE could use, but need to bounce ideas off the experts before I start writing checks.