Search results

it will probably start if i jump PIN 22 to the battery but i may damage the PCM again... maybe the ground... wheres the ground for PIN 22 (which goes to the ignition.)

Installed PCM... still crank but no start...PIN 22 has 2 to 4 Volts when the ignition is on... new relays but no joy.... can anyone help please...

OK, had the skim removed from PCM started for a while because I had to jump pin number 22 to the positive fried something in the PCM so they had to fix it. I’m expecting it back any day however it may have burnt problem through the wire that feeds pin 22 but lose connection in the connector, so...

It’s a chip key that I’ve been using for several years and started not working recently. Did some research and I’ll will send the PCM in to have it put in learn mode. Take the skim module out and hopefully doesn’t need a chip any longer. Thanks for your response and I will let you know how it...

original key was lost a few years ago and locksmith re-keyed it...

Dash light with line through a key. Jeep engine died and now won’t start

OK, boys and girls, turns out that the ground for the dash is below the dash speaker on the driver side. Everything works great now. Thanks for your time.

Thank you very much for your reply to my problem. I have a fresh cigar and heading for the garage now. Thank you very much. I’ll let you know how it goes.

I need some help folks with my 2004 TJ Rubicon. I began to install a new ham radio. My wife bought me for Christmas by tearing into the dash to find where I was going to plug through the firewall to the main battery. I had not disconnected any wires or the old CB radio or the gauges from an old...