Search results

Anyone have any recommendations on how to clear the gunk from the plug holes? Before removing the old plugs I blew out the area with compressed air but clearly, if you look at the crappy photos I took, (very tight area) you can see there's a lot of debris still there, and the last thing I want...

I went to Walmart to pickup an air filter for my 01 and noticed that Fram had two different boxes for the same model filter. However, 3 different variations of the same filter in each box. My guess was that one was older than the other. Upon inspection I noticed one had an orange border and it...

Hi everyone... I did a search for "show your wheels" and didn't get anything that applied. That said, i'm looking to change up the wheels on my TJ and would like to see what other people have on their Jeeps. I plan to stick with 15 inch wheels and would like 2.5" of backspace. If that applies...

Sharing this with the gang here on the forum. Looks like a really nice 03'. But is it odd that there's a transfer case drop when its got a Tom Woods aftermarket shaft and a SYE? Plus the drop pitman arm often seems to be a 'no go' for many TJ owners, so maybe its like the old saying, "every Jeep...

My 90 plus year old grandfather (a retired stick welder) suggested I bolt this thing up to my Jeep as an aux fuel tank. Apparently, it came from an old boat he recently disposed of. First off, I'mnot doing that, but is it something that people would have done decades ago? 😆

I know there's shortages and 'clean' TJ's are rare but this one is up there. The miles are low for the year but the frame has to be immaculate to fetch over 15k, I'd imagine: https://atlanta.craigslist.org/nat/cto/d/canton-2003-jeep-wrangler-sahara-40-tj/7426461404.html

The market is "hot". Dare I say REALLY full of extreme asking prices such this: a 4cyl with no AC. 😵‍💫 Jeep Wranlger Tj 2005 https://cnj.craigslist.org/cto/d/whitehouse-station-jeep-wranlger-tj-2005/7421266766.html

Im installing Ranchos on my 2001 TJ and noticed they are wider than the Zone shocks Im replacing. That said, after installing one, I notice the contact point between the lower spring bucket of my Dana 44 and the tube of the shock is very close. I feel like Ive read that people install these...

Its out of control! This is nice but 12k nice? 🤯 https://bit.ly/3tHd8Od EDIT: had to add this one too https://bit.ly/38VFnPm

Nice TJ but 🧐 for that asking price I’d expect a SYE, not transfer case drop. 1999 Jeep Wrangler 4.0 SPORT 4x4 https://newyork.craigslist.org/lgi/cto/d/new-hyde-park-1999-jeep-wrangler-40/7278338426.html

I often surf CL for anything Jeep, and found the following. Looks incredibly clean. Made me pause for a second and consider selling my JKU......but only if it were an LJ: https://newjersey.craigslist.org/cto/d/pompton-lakes-2006-jeep-wrangler-bullet/7276965999.html

As a Jeep nut, Im often scanning CL for ‘Jeep’ anything. Found this nice looking Rubicon and figured I’d share it with the community because I know a lot of you would appreciate and share your opinions, which are often interesting. It’s certainly a rare gem for a NE Jeep: Lifted Flame Red 2006...

Long story short- I bought a Sahara JKU, for a steal, from a long time friend. Been driving it for over a month and I still favor my TJ over the JK. So much so, that I find myself itching to drive the TJ more and furthermore, have a ‘like’ / hate’ for the JK. Curious how many of you have a JK...

Looking for a crankshaft position sensor and it seems the Mopar (Part Number: 4897321AB) is no longer available. Does anyone know what other brand would be 'reliable' or best? Thanks

....I didnt realize there was a blown 20A fuse! Obviously I didn’t diagnose my stall intelligently enough prior to changing the pump, but it worked out anyway. I got to clean and coat the frame above the tank and was able to remove all the nuts without issue. My question is, could the fuse have...

Anyone know if the bushing that attaches to the rear axle needs to be slitted on the flat side to be installed? The OE has a slit, but the Crown version does not. On Crown’s website they show a bushing with a slit. But what I received does not have one. Would anyone recommend I slit it, or try...

Hi all~Im at a loss here Anyone familiar with how the anti-syphon restrictor should look? If so, should the ball sit behind the spring, as shown in the photo? Or should the ball be at the top, and the spring behind? I dont remember seeing the spring when I fed the syphon hose in. Im...

Hi everyone- Im in the middle of a fuel pump change. So far, all nuts have come loose. The hitch was an extra step, but that was cake with an impact. All three cables: fuel, electric and vapor are disconnected. Inlet unscrewed as well. However, I’ve got close to maybe 11 / 13 gallons in my...

Can this seller justify asking 11k? https://jerseyshore.craigslist.org/for/d/metuchen-2006-jeep-wrangler/7119348527.html

What do you opine of this very unique JKU? Looks like the wheels are Photoshopped: https://fortmyers.craigslist.org/lee/ctd/d/fort-lauderdale-2007-jeep-wrangler/7093084916.html