Search results

Trying to install a Bestop replacement top on my original Trektop NX hardware. The rear bow is nowhere near the right length for the new top. It's too long by over an inch, I'd say. I know these tops stretch when it's warm but it's in direct sun and comparing the construction of the two tops...

I'm constantly seeing people ask what size bolts/nuts they have or need, and a common answer is "take them with you to the hardware store and get one that matches." Do yourself a favor and buy a thread checker. There are a bunch of kinds. There are plastic ones, ones that are plates, little...

Not sure of the year range on the center consoles, but looking for the large white/translucent plastic tub insert for the center consoles without sub, to fit in a 2005

I'm working on figuring this out today but figured maybe somebody could save me some time or has a good idea. I'm hooking up the heated PRP seats. They come with a harness, switches, etc. I just need to find power. They're fused 15a each in the harness so my idea would be to add a 30a fuse...

Threw a tune on my Gladiator Rubicon EcoDiesel on 37s. Stock 3.73s and 6,140 lbs I think it might be quicker than my supercharged TJ now 🤫

I've got an 05 with the IAT sensor in the intake tube, PN 56028364AA that presses in with an o-ring. Long story short I'm going to a water/meth injection system and moving the sensor downstream of my supercharger to properly read IATs. The 04 and earlier have the thread-in IAT sensor in the...

Great condition original uppers. VIN confirmed to be 1999 Dark Tan. Seems like it'd be a shame to cut these skins off so I bought different frames. $150 + ship from 55044, or local pickup.

These are a set of eight of the double adjustable arms without wrench flats. They have grooves on the inside of the ball that leads me to believe they are drilled to work with the grease-able bolts but I can't confirm without disassembling and I don't care to do that. These arms were on my Jeep...

I just finished with the cutting/welding and put my front axle back under the Jeep. I cut the Artec LCA brackets off and welded on some IRO brackets. I have the rear axle out now and have a couple options. The rear LCA mounts are in fine shape but I'm already cutting/welding/painting so I...

Wtf size is this, or is it supposed to be? 10mm too small 11mm too big. I don't unfortunately have any 13/32 or 10.5mm crescents around here. Are 13/32 flare wrenches a thing? Why? The front lines at the frame are 7/16. 2005 Rubi.

Poison Spyder Rocker Knockers for Jeep TJ. These have been powder coated (poorly) and need blasted and repainted. They've been on the Jeep since 2017. But, they're solid, no gouges/bends, just surface rust. 3/16 steel. Have brand new rubber liners that can go with them along with stainless...

I had a local shop install the upper JJ kit on the front axle of my TJ years ago, before I had a welder and knew how to use it. Now I'm in the process of (very leisurely) installing a mid arm kit and I noticed the only loose JJ I have on my entire Jeep is the passenger side upper on the front...

PN 619620083883 3/16 steel Skid only $150 pick up only Lakeville, MN.

37x12.5r15LT 118N Load Range C 6 ply - 2910#@35psi 88 lbs - 22/32 tread Tires have never seen pavement, were mounted up in split beadlocks, trailered, and lightly wheeled once in Gilbert. No chunking or damage, tires still have the molding ridges around the lugs. These tires are from before...

I picked up these half doors last year, I don't know what year they are, and I don't know what you'd call the colors. I wrapped the outside with black vinyl and I'll eventually replace the uppers with whatever color I reskin my Trektop with but I'm hoping these pictures give enough context clues...

This has always been something that my 05 has done since day one. I think this would apply to both manual and auto but I would expect is much more obvious with a manual. I also suspect this is a PCM issue only specific to the 05-06, and maybe as early as 03. When going from low or no throttle...

I have a 2005 4.0 with a 6 speed and Boosted tech kit. What do you see for AFRs in regards to low boost mid throttle situations? When I'm casually driving out of boost I'm reading around 15.2 which seems lean for the factory tune. When I get into normal sort of acceleration situations, fairly...

Hey, joined the forum since Chris seems to be a good source of knowledge for supercharging, and I just ordered a Boosted Technologies M90 kit. Anyway, here's my Jeep, it's my second one. Bought it in mostly stock form, it had some crappy skyjacker lift on it, maybe 2 inches, and 32 inch tires...