Search results

Thanks for the ideas - I sent an email to Mark @Wranglerfix to see what he thinks. Tonight I got under the jeep and thoroughly checked all O2 sensors and the wiring seems to be fine (for what that means to my untrained eyes). During this, I noticed the ground strap going from the firewall to...

Hey Team, The story continues - in the mid 90's today in NC and took the jeep out for some errands - maybe 60 minutes of driving total with 3 stops in between - did fine. Came home and then my wife took the jeep to the grocery store maybe 10 minutes later. Less then a 10 minute drive. On the...

Thanks - I did leave running for approx 5 minutes and wiggle much of the harness, particularly where you are mentioning. In retrospect, I probably should have done the same prior to my quick fix.

Okay - so a quick update. I pulled all the connectors off the PCM and examined and they looked brand new. Starting tracing all wires, and as I touched the wire loom in many locations it crumbled (guessing that is simply a sign of a 15 year old Jeep). I do not see anything obvious on the...

Thanks — did not get a chance to check out these great suggestions yesterday evening, but plan to do so tonight. Will start by checking the connectors on the PCM, then trace the wiring and see if I see any obvious wires that may be shorting out etc and report back. Thanks Jeremy

Hey TJ Community, First post, long time reader. I purchased the TJ in Fall 2019, and it has been great. My wife and I have done a few short road strips (2-4 hours) without issue. In May, we took a trip to the OuterBanks (3 -4 hr drive) and about 2 hours in, the engine sputtered at highway...

You may have figured it out now - but the gasket piece actually flexes and you can take a regular socket and just force it on the bolt (I used a small hammer to tap it on)