Any suggestions on removing the adhesive on the rubber backer for the Rubicon Rocker Guards? Tried Goo Gone and Acetone with minimal results.
Any Suggestions on Removing Rocker Guard Adhesive?
- Thread starter Fonz54
- Start date
MountaineerTom
LJ Enthusiast, Retired USAF Weapons Loader
Supporting Member
Ride of the Month Winner
The best thing I've ever used to get that stuff off of items was my thumb or finger, With a thumb or finget dry, just push it and roll it up to remove it. May take a while and may end up with a few blisters.
I've mentioned this before, LectricShave is one of the most amazing things I've seen for removal of sticky gummy gunk. I don't know what's in it. My father used it for years (on his face) and also to remove vinyl sticker and poison ivy sap. It even worked when I super glued my fingers together.
fourpointzero
TJ Addict
WD40 removed the adhesive on my rockers. However, I don’t know how it effects, if at all, rubber.
Goo Gone works great. The trick is you have to let it sit for a long time. Soak it and let it sit for an hour. Then come back with a scraper tool and it will come right off with not too much work.
Use a heat gun or hairdryer to heat it up really good. Peel as much off as you can, then hit it with soap and water and scrub with a rag. It’ll come off. I had two stickers I took off of my current Jeep that had been there for years. Left all kinds of adhesive behind. The above process left the finish nice and clean.
Thanks all for the suggestions I will be getting some William’s Lectric Shave and give that a shot.
I got the majority off with the thumbnail method. The remaining stuff is just residue.
Similar threads
