Novak Conversions Jeep Wrangler TJ engine mounts

Car pics too cool not to share

Our antique car club visited several collectors that deal mostly in brass era vehicles. This 1913 Twombly cyclecar is a rare bird. It seats two people, one behind the other, has a cute little four cylinder engine and chain drive. The family has owned it since the 1950s, but it's only now nearing completion. The top and upholstery are done. awaiting installation.

1913 Twombly cyclecar.JPG


1913 Twombly cyclecar rear.JPG
 
Speaking of Flathead Fords, here's my dads '40 at that show this past weekend. He really needs to get a bumper on the front. The group went to a local circle track the next day and got to play, but I wasn't invited. :( It's ok though, he ran out of gas on the way. I had to bring him some. To make things better, some young girls stopped where we were on the side of the road pouring gas just to ask who was driving the "big blue car", and said they like that one. :LOL:

40-1.jpeg


40-2.jpeg



The "big blue car" ;)

65Chrysler.JPG
 
Last edited:
I've never heard of it. What kind of engine and trans does it have?

I don't know much about it. The engine is a flathead water cooled four cylinder developing 15 HP and has friction drive. Cyclecars were popular for just a couple of years, until the price of a Model T came down so much they couldn't compete. Only a few survive.

1913 Twombly restored.jpg
 
I don't know much about it. The engine is a flathead water cooled four cylinder developing 15 HP and has friction drive. Cyclecars were popular for just a couple of years, until the price of a Model T came down so much they couldn't compete. Only a few survive.

View attachment 460516

Cool little car. I see zero luxury in today's terms. Actually, I don't even see a brake on that car. It probably has the wooden shoes hiding under the fender. :sneaky:

1695660686416.png


I’d take a ride in one. For some reason, I feel like @Zorba would like to daily drive one of those.
 
Our antique car club visited several collectors that deal mostly in brass era vehicles. This 1913 Twombly cyclecar is a rare bird. It seats two people, one behind the other, has a cute little four cylinder engine and chain drive. The family has owned it since the 1950s, but it's only now nearing completion. The top and upholstery are done. awaiting installation.

View attachment 460443

View attachment 460444

That thing is so narrow, it looks like you could park it on a sidewalk! :)
 
Cool little car. I see zero luxury in today's terms. Actually, I don't even see a brake on that car. It probably has the wooden shoes hiding under the fender. :sneaky:

View attachment 460520

I’d take a ride in one. For some reason, I feel like @Zorba would like to daily drive one of those.

With a friction drive transmission, the brake is likely on the transmission, sort of like on a Model T. You can see the chain drive cover on the restored car.
 
  • Like
Reactions: Squatch and BlueC
Cool little car. I see zero luxury in today's terms. Actually, I don't even see a brake on that car. It probably has the wooden shoes hiding under the fender. :sneaky:

View attachment 460520

I’d take a ride in one. For some reason, I feel like @Zorba would like to daily drive one of those.

Pretty close. I need it to be enclosed and have A/C and cruise control.
 
  • Like
Reactions: Blondie70 and BlueC
More on those Twombly cyclecars:

Twombly vintage Cyclecar​

by TubbyMarch 5, 2020

Entrant number 19 Driver Merv Kroll​

1.gif
2.gif
3.gif
4.gif
5.gif

.
TWOMBLY CYCLECAR
Cyclecars were a phenomenon of the early 19th Century.

Several automakers manufactured these unique vehicles to address the needs of buyers looking for a means of transportation lower in cost than conventional automobiles. Additionally, registration taxes were based on vehicle weight and engine displacement. Lighter in weight and with smaller, less powerful engines, Cyclecars were less costly to buy and taxed at a lower rate.
A typical Cyclecar, such as one type that the Pennsylvania firm of Driggs-Seabury Ordinance manufactured from 1913 to 1915, had two seats in tandem displacement and an under-slung body. Cyclecars of various manufacturers were all powered by either a single-cylinder, V-Twin, a four-cylinder or a motorcycle engine.
Note that the tandem two-seater configuration and engine type gave the impression that the vehicle was a hybrid type of motorcycle-automobile combination.
Cyclecars enjoyed limited popularity for a time and were even entered in races restricted to these vehicles
. During the brief heyday of the Cyclecars, they were manufactured in many countries such as Austria, Belgium, Canada, Czechoslovakia, Germany, Italy, Sweden, Spain, France and England. The most prolific producers of Cyclecars were the English.
The Ford Motor Company’s Model hastened the demise of the Cyclecar T. Ford advertised the Model T’s advantages over the Cyclecar, one of which was the Ford sold at a price very near the Cyclecar. Additionally, the Model T offered superior comfort and roadability. By the early 1920s, the Cyclecar was but a curious memory.
TWOMBLY CYCLECAR
Cyclecars were a phenomenon of the early 19th Century. Several automakers manufactured these unique vehicles to address the needs of buyers looking for a means of transportation lower in cost than conventional automobiles.
Additionally, registration taxes were based on vehicle weight and engine displacement. Lighter in weight and with smaller, less powerful engines, Cyclecars were less costly to buy and taxed at a lower rate.
A typical Cyclecar such as one type
1914 Twombly Cyclecar
Driggs-Seabury Ordinance Corp Pennsylvania
Owned By: Mervyn and Margaret Kroll – Brisbane
(one of three known remaining worldwide)

Motor

“Twombly” type “A” . 4 cylinders, four cycles, water-cooled, cast en bloc, thermo syphon system 12-15 H.P. Positive oiling mechanical valves located on the left side of the motor. High-grade bronze bearings Throughout
.Transmission – “Twombly” straight-faced friction with two-speed drive shaft and single chain drive to rear axle, giving six speeds forward and two reverse. Bearings of high-grade bronze.
Rear Axle – “Twombly” live unbreakable type with standard differential and solid shaft from wheel to wheel, differential casing acting as an emergency brake. The axle is surrounded by a seamless steel tube. Hyatt roller bearings exclusively.
Front Axle – Drop forged I-beam section, chrome nickel steel. Bearings annular ball.
Suspension – “Twombly” underslung, giving a low centre of gravity and perfect balance.
Frame – Pressed steel, channel section.
Springing system – Rear – Cantilever, 36 inches long Front – Semi-elliptic, 30 inches long.
Wheels –
28 x 2 1/2 extra heavy wire
Tyres – Extra heavy clincher non-skid, rear, corrugated, front.
Brakes – Service, on a different case. The transmission acts as a powerful emergency brake.
Gas tank – In cowl, 5 gallons capacity
Ignition – Heinze high-tension magneto
Carburetor – Longuemeare
Lubrication – Splash and force feed.
Radiator – Cellular, nickel.
Steering – “Twombly” adjustable gear. Steering wheel 14 inches, Irreversible worm and sector.
Control – Hand or foot. Gas throttle lever on dash and foot throttle accelerator. Contracting brake band on the differential casing. Transmission can be used as a powerful emergency brake.
Wheelbase – 100 inches.
Road Clearance – 9 1/2 inches.
Weight – 600 pounds.
Stock colour – Sulphur yellow with black and nickel trimmings.
Equipment- includes two oil side lamps and one tail lamp: Horn and complete set of tools.
EXTRA EQUIPMENT
Top – One-man top with envelope and side curtains, $25.00
Windshield – $12.00
Speedometer – $12.00
Electric lighting – 2 headlights, one tail light, storage battery and dimmer, independent push buttons
 
More on those Twombly cyclecars:

Twombly vintage Cyclecar​

by TubbyMarch 5, 2020

Entrant number 19 Driver Merv Kroll​

View attachment 460551

View attachment 460552

View attachment 460553

View attachment 460554

View attachment 460555
.
TWOMBLY CYCLECAR
Cyclecars were a phenomenon of the early 19th Century.

Several automakers manufactured these unique vehicles to address the needs of buyers looking for a means of transportation lower in cost than conventional automobiles. Additionally, registration taxes were based on vehicle weight and engine displacement. Lighter in weight and with smaller, less powerful engines, Cyclecars were less costly to buy and taxed at a lower rate.
A typical Cyclecar, such as one type that the Pennsylvania firm of Driggs-Seabury Ordinance manufactured from 1913 to 1915, had two seats in tandem displacement and an under-slung body. Cyclecars of various manufacturers were all powered by either a single-cylinder, V-Twin, a four-cylinder or a motorcycle engine.
Note that the tandem two-seater configuration and engine type gave the impression that the vehicle was a hybrid type of motorcycle-automobile combination.
Cyclecars enjoyed limited popularity for a time and were even entered in races restricted to these vehicles
. During the brief heyday of the Cyclecars, they were manufactured in many countries such as Austria, Belgium, Canada, Czechoslovakia, Germany, Italy, Sweden, Spain, France and England. The most prolific producers of Cyclecars were the English.
The Ford Motor Company’s Model hastened the demise of the Cyclecar T. Ford advertised the Model T’s advantages over the Cyclecar, one of which was the Ford sold at a price very near the Cyclecar. Additionally, the Model T offered superior comfort and roadability. By the early 1920s, the Cyclecar was but a curious memory.
TWOMBLY CYCLECAR
Cyclecars were a phenomenon of the early 19th Century. Several automakers manufactured these unique vehicles to address the needs of buyers looking for a means of transportation lower in cost than conventional automobiles.
Additionally, registration taxes were based on vehicle weight and engine displacement. Lighter in weight and with smaller, less powerful engines, Cyclecars were less costly to buy and taxed at a lower rate.
A typical Cyclecar such as one type
1914 Twombly Cyclecar
Driggs-Seabury Ordinance Corp Pennsylvania
Owned By: Mervyn and Margaret Kroll – Brisbane
(one of three known remaining worldwide)

Motor

“Twombly” type “A” . 4 cylinders, four cycles, water-cooled, cast en bloc, thermo syphon system 12-15 H.P. Positive oiling mechanical valves located on the left side of the motor. High-grade bronze bearings Throughout
.Transmission – “Twombly” straight-faced friction with two-speed drive shaft and single chain drive to rear axle, giving six speeds forward and two reverse. Bearings of high-grade bronze.
Rear Axle – “Twombly” live unbreakable type with standard differential and solid shaft from wheel to wheel, differential casing acting as an emergency brake. The axle is surrounded by a seamless steel tube. Hyatt roller bearings exclusively.
Front Axle – Drop forged I-beam section, chrome nickel steel. Bearings annular ball.
Suspension – “Twombly” underslung, giving a low centre of gravity and perfect balance.
Frame – Pressed steel, channel section.
Springing system – Rear – Cantilever, 36 inches long Front – Semi-elliptic, 30 inches long.
Wheels –
28 x 2 1/2 extra heavy wire
Tyres – Extra heavy clincher non-skid, rear, corrugated, front.
Brakes – Service, on a different case. The transmission acts as a powerful emergency brake.
Gas tank – In cowl, 5 gallons capacity
Ignition – Heinze high-tension magneto
Carburetor – Longuemeare
Lubrication – Splash and force feed.
Radiator – Cellular, nickel.
Steering – “Twombly” adjustable gear. Steering wheel 14 inches, Irreversible worm and sector.
Control – Hand or foot. Gas throttle lever on dash and foot throttle accelerator. Contracting brake band on the differential casing. Transmission can be used as a powerful emergency brake.
Wheelbase – 100 inches.
Road Clearance – 9 1/2 inches.
Weight – 600 pounds.
Stock colour – Sulphur yellow with black and nickel trimmings.
Equipment- includes two oil side lamps and one tail lamp: Horn and complete set of tools.
EXTRA EQUIPMENT
Top – One-man top with envelope and side curtains, $25.00
Windshield – $12.00
Speedometer – $12.00
Electric lighting – 2 headlights, one tail light, storage battery and dimmer, independent push buttons

This kind of stuff is very interesting & IMO amazing. The stuff we came up with in the early 1900's I find inspiring.

I don't know that I'd have the skill to try and reassemble something like this. I love the extra equipment list.
 
@Squatch and @BlueC

Went and got a couple more pictures of that flatty today before we left (our property is 500 miles from home). Quick ones, because I was ready to leave. The body shell is about a quarter mile from the frame, so no pics of that either.

Next spring, I’ll probably drag this out of the woods and figure out how to get it into the hands of someone who needs it.

IMG_1231.jpeg


IMG_1232.jpeg


IMG_1233.jpeg


IMG_1234.jpeg
 
@Squatch and @BlueC

Went and got a couple more pictures of that flatty today before we left (our property is 500 miles from home). Quick ones, because I was ready to leave. The body shell is about a quarter mile from the frame, so no pics of that either.

Next spring, I’ll probably drag this out of the woods and figure out how to get it into the hands of someone who needs it.

View attachment 460590

View attachment 460591

View attachment 460592

View attachment 460593

Good on ya, Mike! Though the later 24-stud versions are more desirable, you will surely be able to find someone who wants the 21-stud. Those fenders, if not completely rotted away at the bottoms, may well be of use to someone, as well. Hell, maybe someone wants the frame, too!
 
Novak Conversions Jeep Wrangler TJ engine mounts