Recent content by Nate 2002 TJ

I just got 4ft of fuel hose and did it myself

To discconnect the whole thing you need a fuel line disconnect tool. (See photo). When i fixed mine i just used fuel hose and clamped it right on to the fuel rail and left the adapter off. Mine had a crack in the metal part so i had to replace the full 4ft of fuel line or so. Idk if it is...

Yeah that is what I was seeing. Ill probably just go with one like the second one

My bad y’all lol. Ended up taking it to a friend of mine. He was able to weld on a. New control arm mount. Only thing else that was needed was a new sensor for my tranny (oil was leaking out) and a new tire and rim. Axle was fine

Yesterday my Jeep began having a fuel line leak. Trying to find a replacement part and having issues. Here is the part that I need (first picture). I was wondering if a fuel hose like the second picture would work as a replacement?

replacing my engine mount and ran into this issue. the bracket is no where near aligned. the old mount was very bent and i need ideas for how to get it realigned so i can get the new one on. here are photos

the part of mine that is cracked is the arch that goes over the rest of it. i plan to replace it soon but is this something i can still drive on for a few more days before i can replace it?

Was going over my Jeep today. when I saw part of my passenger side engine mount had a crack. it looks to me that the part that actually is used to mount the engine is underneath the cracked part and is separate. wondering if anyone can explain to me what the different parts of the engine mount...

thanks. I was able to find the piece i need here.

Was driving today when my power steering went out, my alternator stopped working, and my engine temp jumped. ended up being that my belt had come off. upon further inspection, the bolt holding my the tensioner for the belt snapped (see pictures) part of the bolt is still in the piece that mounts...

Thanks! That took care of the sudden jumps while turning however there is still a loud clicking noise whenever I turn. Is that just something that will go away with time as i break the new parts in or do i need to look at the differential and stuff?

I just bought another jeep the other day. 2001 I6 manual. the previous owner had installed an Aussie locker fairly recently. everything works fine in the jeep (other than my lack of skill while driving a manual) except when I take a turn i hear a banging coming from the jeep (i think the front...

Ended up being the fan shroud. it was broke at the bottom and the previous owner had installed a bracket to hold it together. one of the screws had came out causing the fan to hit the fan shroud sometimes. I re-attatched the bracket and will be ordering a new fan shroud so i don’t have this...

I did not check the level however I replaced all the transmission fluid about 6 months back and I have not seen any leaks since. I am worried it could be a gear going bad since it only happens when in reverse.