Recent content by Muttjr12

So I had the distributor put in Friday and no luck, still stalled out. Yesterday I had an ignition switch installed and now there's no spark to the distributor..

Sorry clicked on the wrong link

So what you're saying is the only two things I haven't done yet is the ignition switch and the PCM? If the ignition switch doesn't fix it, what would be your price for testing or sending me a new PCM? My email is muttjr21@gmail.com if you want to send me the details that way instead.

Jeep is currently sitting in the shop over the weekend as I basically can't drive it home, different shop from the one that told me it was a sensor in the transmission. I think I'm going to try the ignition switch Monday and see if that does fix the issue. If not I'll definitely be in touch...

It happens at random times and speeds, could be within a mile or after an hour of driving. The only code my jeep has is for the evap system, I've had the evap valve replaced but not the solenoid so that probably that issue. When it happens there's no noises, it just stalls the engine, my...

I had my jeep in the shop today, they installed a brand new distributor assembly that came with a new sensor, cap, and rotor. They drove it about 5 miles and it stalled out again still. Do you think the crankshaft position sensor I had put in not too long ago was faulty maybe? And should I just...

Just got informed from the shop, after installing new distributor assembly still stalling out within 5 miles of driving. Any other ideas?

I've had a shop tell me my PCM could be going out but would cost $400 not including labor for them to send it out to get refurbished, and they can't find a new one anymore through their contacts and the jeep would be down for a week or two. So I think I'm going to just make an appointment and...

I appreciate your help, I will definitely check out the distributor. I'll keep you posted and hopefully that's the issue.

Usually after it dies I pull over to the side of the road, pull the ASD relay for about 5 minutes and after putting it back in it usually starts back up but only for a short distance then dies again. I basically can't leave the town I live in

I was almost thinking that after looking up kits and not seeing the sensors like in the 46RE and 47RE

I've done plugs, wires, cap and rotor, checked compression in the cylinders, tested the fuel pressure, had a new fuel pump installed. When it stalls out, I lose all power, entire gauge cluster loses everything, a few times when it died its read NO BUS where the mileage usually reads.

My jeep keeps stalling and losing all power after driving short distances, I've already had the crank shaft position sensor replaced. I had a shop tell me that the transmission governor pressure sensor has been the main cause of the issue from what they've seen. But now the shop and I can't...

Rewired my climate control unit twice now and the heater is cutting in and out. When I wiggle the wires it will kick back on but once I let go of the wires it shuts off again. I've checked fuses, I've installed a new unit itself thinking maybe a connection inside was bad but it's still not working

My fuel pump also shuts off while driving and lags the engine, occasionally shuting the engine off causing me to pull off the road and restarting it. While restarting, I sometimes have to pop the hood and play with my relays and fuses to get the fuel pump to engage. I replaced my ASD relay at...