Recent content by Kawijeep

  1. K

    Odd stalling issue after a hard turn seeking help!

    Was just dealing with a similar issue. I would get all kinds of weird codes, fuel pump, crank sensor, then coil then back to crank sensor and fuel pump. Ended up being a cam sensor that I already replaced once before. Similar weird kind of thing but instead of dying on turns it would start to...
  2. K

    Stalling issue

    Would o2 sensors not give me the type of problem I’ve having?
  3. K

    Stalling issue

    Will do! I probably won’t have much time throughout the week to mess with it much but I’ll be working on it this weekend. I did erase those codes last night and haven’t gotten another one. Still has a hiccup like one sputter randomly but has yet to sputter itself to stall/die. I’ll also try and...
  4. K

    Stalling issue

    The jeep starts just fine as stated previously. It’s a stalling / sputtering issue I have looked at a lot of the wiring. ( I may have missed something ) so I can definitely go through and check again. I’m also looking into o2 sensors because I have a code for o2 sensors. It’s a work in progress man.
  5. K

    Stalling issue

    Huh?
  6. K

    Stalling issue

    So when I changed that sensor 2 days ago is also when I disconnected all electrical plugs and greased them. So in doing so I disconnected the battery. When I started the Jeep there was no check engine light for a while until I drove it and it started stuttering again. Should I erase the codes...
  7. K

    Stalling issue

    So from the information I have above I need to change some 02 sensors. I’m confused about why it’s still giving me crank/cam sensor issues. I’ve replaced them both cam sensor just 2 days ago. I also used MOPAR. When I replace the 02 from what I’ve read it needs to be NTK.
  8. K

    Stalling issue

  9. K

    Stalling issue

    While chasing this issue this was actually the next thing I was going to replace was 02 sensors. Until I was told to get some freeze frame data. It does seem to do better if I wait until it warms to operating temp but still has the issue. If I start it up and immediately leave it is awful, like...
  10. K

    Stalling issue

    It’s a 2000 4.0 5 speed
  11. K

    Stalling issue

    good idea. I don’t have a scanner so I’ll order it up and hopefully get to the bottom of this that way. Thank you.
  12. K

    Stalling issue

    I’ve gone through the posts about stalling already and it doesn’t seem like anyone has the same issue I’m having. I can’t replicate the problem. It randomly just stutters, sometimes just once other times it will stutter violently until it dies. Sometimes I can floor it and prevent it from...