CharlesHS's latest activity
-
I got the parts ordered… they are supposed to be in Tuesday…. I also talk to a friend of mine that’s going to help me…. I’m sure I... -
CharlesHS replied to the thread Replacement throttle cable?.When was the last time you cleaned the Idle Air Control solenoid which controls the engine speed at idle that can stick when dirty ?
-
CharlesHS replied to the thread Is this a double cardan u-joint?.If you have a lot of rust on those bolt threads; that Walmart special may not be enough to penetrate the rust. Acetone can usually be...
-
CharlesHS replied to the thread Is this a double cardan u-joint?.When you responded that you have some penetrating stuff; what kind of penetrating stuff are you using ? Some (Liquid Wrench, PB Blaster...
-
I replaced the entire clutch master cylinder and slave assembly. Works now!
-
CharlesHS replied to the thread Misfire made worse.I spent a couple years trouble shooting the Random Misfire codes and specific cylinder misfires. Tried the Mopar CCC and Seafoam in the...
-
CharlesHS replied to the thread Did I not have the original stock springs?.It may be an optical illusion in the picture; but is the diameter of the new coil material slightly larger (thicker) than the stock...
-
CharlesHS replied to the thread Warning buzzer.mrblaine provides the answer. https://wranglertjforum.com/threads/2002-tj-brake-warning-light-and-buzzing.87896/post-1823166
-
CharlesHS replied to the thread Unique Ducks.The real question you should be asking is.... Is there anything you wouldn't accept from her ??
-
-
Would you accept a duck from her?
-
I'm suspicious of any ducks left on my Jeep that don't fit my personality.
-
-
This morning I went food shopping early to avoid the people traffic at the store. When I returned to the Jeep; this is the duck I found...
-
-
CharlesHS replied to the thread LED Headlight Issues.LEDs can be polarity sensitive... There shouldn't be, but there could be a conflict between the two LED headlights. The fact there are...
-
CharlesHS replied to the thread Down grade from 4" to 2 1/2" lift?.Not knowing what his Jeep has installed presently; the setup could be anything from meticulous to red neck engineered which is why I...
