Recent content by caddisguy

Thanks Chris! I really appreciate the response. I started my search for a vented gas cap that will fit the TJ. Seems like a bit of a struggle so far and AI can't come up with anything. Worst case I could probably just do a similar mod that I did on a chainsaw with a damaged tank. I found some...

It's a bit of a long story, but the TLDR is I let the wrong shop chase a P0455 on my 2003 TJ a few years back. They parts cannoned it and nothing worked. Ultimately I believe they flashed the ECM to ignore EVAP codes. I don't even get a pending code driving around with the gas cap loose or...

Thank you for the confirmation on that! I found the threads on mine to be tacky as well. All seems well. I plugged OBD2 scanner yesterday and it is idling 650-670. I wasn't having any noticeable idle issues to begin with though and odds are this won't solve the issue I'm chasing. Had two cases...

I haven't had any issues with mine overheating on the dash, but I live in BC Canada where it doesn't get particularly hot most of the year. Never had an issue while mobile, but if I am parked at camp out in the sun on a hot day, the heat sync on the radio will start to get quite hot, so I'll put...

Update: I looked at the intake and don't see any possibility of that getting through the port. Seems to be running fine. Didn't plug in the Bluedriver but looks like it is idling around 550-600 warm. One of these days I'll take off the whole TB and have a look inside the IAC housing and see how...

Not a CB, but here's what I did with my VHF/UHF radio. I bought an aftermarket dash put and installed the radio bracket and mic clip into that. I usually just run a mag mount antenna inside on the rear passenger wheel well. If I need optimal signal (getting into a repeater far away or talking...

I took my IAC out to clean it. While I was wiping the tip with a shop towel, I was inadvertently adjusting (unscrewing) it. The tip/sleeve/spring all came right out. From what I know (which isn't much) about this is sensor, is that you want the length no more than 1 & 1/8" or it can interfere...