tworley

Supporting Member Ride of the Month Winner

Metalcloak free From Arvada, CO

Joined: May 23, 2018

Last seen: Today at 4:30 PM

Latest activity Postings Attachments Images About

- tworley reacted to hear's post in the thread Finally planning to remove the outer axle tube seals (do I need to run the oil slinger?) with Haha.
  
  Play the long game. Leave the tires cranked over to allow maximum sun baking of the plastic. They'll just crumble off in no time.
  
  Today at 5:05 AM
- tworley reacted to JMT's post in the thread Junk yard parts options for budget upgrades? with Like.
  
  ZJ Tie Rod
  
  Yesterday at 7:33 PM
- tworley replied to the thread ISO refurbished injector source.
  
  What do the orings on your current injectors look like? Most problems occur as a result of cracked/torn/damaged orings rather than the...
  
  Yesterday at 7:33 PM
- tworley replied to the thread Finally planning to remove the outer axle tube seals (do I need to run the oil slinger?).
  
  The RG&A shafts are larger in diameter so the stock plastic cover won't fit. FWIW, my tube ends have been open since 2019.
  
  Yesterday at 7:31 PM
- tworley reacted to John’o's post in the thread 1975 Jeep J-10 Chinook Camper with Love.
  
  https://www.facebook.com/share/17scTRSWkY/?mibextid=wwXIfr Trying real hard to not make an offer.
  
  Tuesday at 9:54 PM
- tworley reacted to NashvilleTJ's post in the thread Nashville TJ's Build - Continued with Sad.
  
  Ever have one of those days when you wake up to sunshine, in a great mood, looking forward to life, excited for your next project - and...
  
  Tuesday at 9:06 PM
- tworley reacted to NashvilleTJ's post in the thread Nashville TJ's Build - Continued with Like.
  
  And then it was just a matter of getting everything back together. First up, I pressed on new carrier bearings: I've lost count of...
  
  Tuesday at 9:06 PM
- tworley reacted to NashvilleTJ's post in the thread Nashville TJ's Build - Continued with Like.
  
  A short while ago I reached out to a fellow forum member about an Idea I had for a sewing project. As the project involved fire hose...
  
  Tuesday at 9:05 PM
- tworley reacted to Woodrow's post in the thread Basket's Build with Like.
  
  do this: https://wranglertjforum.com/attachments/img_6408-jpeg.517727/ this is a UCF engine skid (1/4’ aluminum). use a 45 degree...
  
  Tuesday at 8:36 PM
- tworley reacted to JMT's post in the thread Basket's Build with Like.
  
  Countersink PH4 is nice for underbody skids. Not sure about that skid hole though.
  
  Tuesday at 8:36 PM
- tworley reacted to jjvw's post in the thread How far to press in Dana 30 inner seals? with Haha.
  
  This reply makes me feel reckless and dirty.
  
  Tuesday at 8:09 PM
- tworley reacted to lBasket's post in the thread Best bank to finance TJ with Like.
  
  I don't actually do that I thought this was the terrible financial advice thread!!
  
  Tuesday at 1:54 PM
- tworley reacted to JMT's post in the thread WTB: Front Bumper Rubber Pieces with USA Proud.
  
  Classic!
  
  Tuesday at 1:01 PM
- tworley replied to the thread WTB: Front Bumper Rubber Pieces.
  
  Too bad you didn't need a set in July, I had a set listed here. They ended up in the trash.
  
  Tuesday at 12:22 PM
- tworley replied to the thread How far to press in Dana 30 inner seals?.
  
  There is a inner lip in the tube, but you'll have to use a digital caliper accurate to 0.0001", and measure the axial distance from the...
  
  Tuesday at 12:17 PM
Show older items
Loading…
Loading…
Loading…
Loading…

Top Bottom

Search

Search

tworley

Find content

Latest activity Postings Attachments Images About