Latest activity Postings Images About
-
-
Bbty34 replied to the thread Woodrow's 97 Green TJ Moderate Build.Is there 3/4" of clearance under the bottom of the fuel pump to start with, or do you need to mess with that too now that the pump...
-
BThat’s one I thought I would use and absolutely never do. Lower gears give so much more control (I know, I know! Just get an auto…😂)
-
Bbty34 reacted to mrblaine's post in the thread Yukon Gear vs. Revolution Gear for a 14-bolt with
Like.
The pinion teeth by design are stronger than the ring gear teeth. If this is a debris failure, then there should be corresponding damage... -
Bbty34 replied to the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs).I had 4.88 with that combo and switched to 5.38 while keeping 35s.
-
Bbty34 reacted to TexasTJ2004's post in the thread What gear ratio should I install in my Jeep Wrangler TJ / LJ? (and other re-gearing FAQs) with Like.
I am targeting my gearing for comfortable daily driving in 2HI. Not doing any crazy trails, so Low gear (NP231) is working well for me...
-
Bbty34 replied to the thread Has anyone installed a Savvy mid-arm with an OX locker?.If you don't have a stock cover laying around you can use a spacer of the same thickness to locate it (with the ox cover off). Once you...
-
-
BDo they mention anywhere what the material of this race gear is? I had to go to race gears in my Orange car (9" based stuff, light...
-
Bbty34 replied to the thread Lets talk about a weird axle swap....At one point I was looking at doing something similar, but ended up finding a CJ offset flanged 44 and gave up. It's been a little bit...
-
Bbty34 replied to the thread Tennessee Red.If you put a tape on your rear 60, it doesn't hang down and further than a standard TJ 44. Junkyard 60s are a different story, but...
-
Bbty34 replied to the thread Cliff's TJ.He went by CVD a few years back on a different jeep forum. Had a lot of work done by Blaine including a trial onto how JK axles would...
-
Bbty34 replied to the thread Bty34 TJ build.Thanks. The first time around was very much "An angle on the back is better than nothing" and the second was "I have this piece of...
-
BI don't think it takes a doctorate in econ to figure it out. The main drivers are that the banks tend not to loan for 20+ year old cars...
-
Bbty34 replied to the thread Bty34 TJ build.For the first time since removing the Savvy under armor 3 years ago, I pulled the skid at the end of the year and it wasn't bent. I...
-
-
Bbty34 replied to the thread Bty34 TJ build.I forgot to mention, we keep them in the harnesses car seats as long as possible in the jeeps when we're offroad. I think the harness...
-
-
Loading…
-
Loading…
-
Loading…
